{"id":1984,"date":"2021-01-15T15:49:14","date_gmt":"2021-01-15T06:49:14","guid":{"rendered":"https:\/\/www.mako-metal.com\/eng\/?p=1984"},"modified":"2021-07-26T19:03:47","modified_gmt":"2021-07-26T10:03:47","slug":"1984","status":"publish","type":"post","link":"https:\/\/www.mako-metal.com\/eng\/archives\/1984","title":{"rendered":"Explanation of the ceiling and wall mounting structure of 3D design stainless steel panels"},"content":{"rendered":"<div class=\"lmt__inner_textarea_container\" title=\"\u5225\u306e\u8a33\u8a9e\u4e00\u89a7\u3092\u898b\u308b\u306b\u306f\u3001\u5358\u8a9e\u3092\u30af\u30ea\u30c3\u30af\u3057\u3066\u304f\u3060\u3055\u3044\">\n<div id=\"target-dummydiv\" class=\"lmt__textarea lmt__textarea_dummydiv\">\n<div class=\"lmt__inner_textarea_container\" title=\"\u5225\u306e\u8a33\u8a9e\u4e00\u89a7\u3092\u898b\u308b\u306b\u306f\u3001\u5358\u8a9e\u3092\u30af\u30ea\u30c3\u30af\u3057\u3066\u304f\u3060\u3055\u3044\">\n<div>\n<div id=\"toc_container\" class=\"no_bullets\"><p class=\"toc_title\">contents<\/p><ul class=\"toc_list\"><li><a href=\"#Different_panel_shapes_of_3D_design_stainless_steel\"><span class=\"toc_number toc_depth_1\">1<\/span> Different panel shapes of 3D design stainless steel<\/a><\/li><li><a href=\"#What_are_the_features_and_cautions_of_cut_panels\"><span class=\"toc_number toc_depth_1\">2<\/span> What are the features and cautions of cut panels?<\/a><ul><li><a href=\"#Installation_of_3D_stainless_steel_design_cut_panels\"><span class=\"toc_number toc_depth_2\">2.1<\/span> Installation of 3D stainless steel design cut panels<\/a><\/li><li><a href=\"#View_of_the_screws_that_prevent_the_3D_stainless_steel_design_cut_panel_from_falling_off\"><span class=\"toc_number toc_depth_2\">2.2<\/span> View of the screws that prevent the 3D stainless steel design cut panel from falling off.<\/a><\/li><\/ul><\/li><li><a href=\"#What_are_the_features_and_cautions_of_bent_panels\"><span class=\"toc_number toc_depth_1\">3<\/span> What are the features and cautions of bent panels?<\/a><\/li><li><a href=\"#Application_of_cutbent_panels\"><span class=\"toc_number toc_depth_1\">4<\/span> Application of cut\/bent panels<\/a><\/li><li><a href=\"#Finally\"><span class=\"toc_number toc_depth_1\">5<\/span> Finally.<\/a><\/li><\/ul><\/div>\n<h2><span id=\"Different_panel_shapes_of_3D_design_stainless_steel\">Different panel shapes of 3D design stainless steel<\/span><\/h2>\n<\/div>\n<\/div>\n<\/div>\n<div>There are two main types of 3D design stainless steel metal panels: cut panels and bent panels.<br \/>\nA cut panel shape is a design panel where the plate material is cut into a square shape to create a sharp outline.<br \/>\nA bent panel is a panel in which the plate is bent to give it an ingenious mounting method, while the bent part is slightly elongated and has an R penalty or higher.<\/div>\n<div><img class=\"aligncenter wp-image-2562\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff11.jpg\" alt=\"\" width=\"529\" height=\"392\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff11.jpg 800w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff11-300x222.jpg 300w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff11-768x569.jpg 768w\" sizes=\"(max-width: 529px) 100vw, 529px\" \/><\/div>\n<\/div>\n<p>You can see that the edges are sharper on the cut panel.<br \/>\nIn the bent panel, the bent part is white<\/p>\n<p>\uff1cRemarks&gt;<\/p>\n<p>Product name \uff1aMysterious stainless steel mirror ripples<br \/>\nComparison of 3D stainless steel SUS304 mirror polish with 0.6mm thickness<\/p>\n<p><img class=\"aligncenter wp-image-2563\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff12.jpg\" alt=\"\" width=\"672\" height=\"532\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff12.jpg 800w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff12-300x238.jpg 300w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c8\uff12-768x609.jpg 768w\" sizes=\"(max-width: 672px) 100vw, 672px\" \/><\/p>\n<p>&nbsp;<\/p>\n<h2><span id=\"What_are_the_features_and_cautions_of_cut_panels\">What are the features and cautions of cut panels?<\/span><\/h2>\n<p>This section explains the structure of the cut panel shape and standard installation structure of 3D stainless steel design panels.<\/p>\n<p>In practice, it is necessary to customize it according to local conditions and applications.<br \/>\nFor example, the back reinforcement can be made flat and fixed directly with screws from the front.<\/p>\n<p><img class=\"aligncenter wp-image-1987 size-full\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f36.jpg\" alt=\"\" width=\"746\" height=\"497\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f36.jpg 746w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f36-300x200.jpg 300w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f36-270x180.jpg 270w\" sizes=\"(max-width: 746px) 100vw, 746px\" \/><\/p>\n<p>A cut panel is a sharply cut piece of wood with mounting and reinforcement hardware attached to the back.<br \/>\nBasically, the panels are glued together, but when they are used as ceiling materials, it is necessary to attach screws to prevent them from falling.<br \/>\nSince the screws are visible on the surface, a polished circular cover of the same type is attached to the screw heads to make them less noticeable.<\/p>\n<p><img class=\"aligncenter wp-image-1988 size-full\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f37.jpg\" alt=\"\" width=\"746\" height=\"497\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f37.jpg 746w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f37-300x200.jpg 300w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f37-270x180.jpg 270w\" sizes=\"(max-width: 746px) 100vw, 746px\" \/><\/p>\n<h3><span id=\"Installation_of_3D_stainless_steel_design_cut_panels\">Installation of 3D stainless steel design cut panels<\/span><\/h3>\n<p>In order to reduce or eliminate the width of the joints, a joint shape is necessary, but in this article, we will explain the general method of installation with joints in an easy-to-understand manner.<br \/>\nThe explanation is based on the assumption that the product will be installed on a wall or ceiling, but since this is the simplest form, it is necessary to consider the actual situation at the site.<\/p>\n<p><img class=\"aligncenter wp-image-1989 size-full\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f38.png\" alt=\"\" width=\"577\" height=\"1188\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f38.png 389w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f38-146x300.png 146w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f38-497x1024.png 497w\" sizes=\"(max-width: 577px) 100vw, 577px\" \/><\/p>\n<p>Thus, the bent reinforcement is glued to the back of the cut panel and screwed to some parts of the panel.<br \/>\nThe flanges on the reinforcement side are overlapped and sewn to the channel mold steel on the wall with screws.<\/p>\n<h3><span id=\"View_of_the_screws_that_prevent_the_3D_stainless_steel_design_cut_panel_from_falling_off\">View of the screws that prevent the 3D stainless steel design cut panel from falling off.<\/span><\/h3>\n<p>Depending on where it is installed, it may be safer to have a screw to prevent it from falling off in one part because it is bonded with adhesive.<br \/>\nThe conclusion is that the screws may be noticeable depending on the location and angle.<\/p>\n<p><img class=\" wp-image-2561 alignleft\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c83.jpg\" alt=\"\" width=\"656\" height=\"889\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c83.jpg 590w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u30ab\u30c3\u30c83-221x300.jpg 221w\" sizes=\"(max-width: 656px) 100vw, 656px\" \/><\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<h2><span id=\"What_are_the_features_and_cautions_of_bent_panels\">What are the features and cautions of bent panels?<\/span><\/h2>\n<p>This section describes the structure of the bent panel shape and the standard installation structure of the 3D stainless steel design panel.<br \/>\nIn practice, it is necessary to customize it according to local conditions and applications.<\/p>\n<p>In the case of 2D stainless steel, the panels are sewn directly to the structure on the back without any reinforcement on the back.\u3000Of course, a reinforcing structure must be added to the inner surface of the panel to prevent warping of the panel.<\/p>\n<p><img class=\"aligncenter wp-image-1991 size-full\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f310.jpg\" alt=\"\" width=\"805\" height=\"537\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f310.jpg 800w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f310-300x200.jpg 300w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f310-270x180.jpg 270w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f310-768x512.jpg 768w\" sizes=\"(max-width: 805px) 100vw, 805px\" \/><\/p>\n<p>Unlike the cut panel, the cover itself is also bent.<br \/>\nThis is because only two sides are bent to make it easier to understand, but in reality, the cover is made with four sides bent, or with this rising part bent inward or outward in complex ways.<\/p>\n<p><img class=\"aligncenter wp-image-1992 size-full\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f311.jpg\" alt=\"\" width=\"805\" height=\"536\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f311.jpg 800w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f311-300x200.jpg 300w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f311-270x180.jpg 270w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f311-768x511.jpg 768w\" sizes=\"(max-width: 805px) 100vw, 805px\" \/><\/p>\n<p>In this way, it can be fixed to the reinforcing structure from the fence face or back, so there is no effect on the surface.<br \/>\nThis has the disadvantage that the bent portions will not be sharp.<\/p>\n<p><img class=\"aligncenter wp-image-1993 size-full\" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f312.png\" alt=\"\" width=\"620\" height=\"1271\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f312.png 390w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f312-146x300.png 146w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f312-500x1024.png 500w\" sizes=\"(max-width: 620px) 100vw, 620px\" \/><\/p>\n<p>Thus, the bent reinforcement is glued to the back of the bent panel and screwed to some parts of the panel.<br \/>\nThe flanges of the stiffener side are overlapped and sewn to the channel mold steel of the wall with screws.<\/p>\n<h2><span id=\"Application_of_cutbent_panels\">Application of cut\/bent panels<\/span><\/h2>\n<p>Bending panels require bending of the sides, which makes it impossible to create complex shapes.<br \/>\nCut panels, on the other hand, are flat and can be made into any shape, such as circular or fan-shaped.<\/p>\n<p>In particular, when used on ceilings, cut panels are often used to create unique puddle-like shapes, or to create shimmering effects with lighting, etc. Therefore, cut panels that can be freely formed are preferred.<\/p>\n<p><img class=\"aligncenter wp-image-1994 \" src=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f313.png\" alt=\"\" width=\"810\" height=\"1105\" srcset=\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f313.png 586w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f313-220x300.png 220w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f313-751x1024.png 751w, https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2021\/01\/\u56f313-768x1048.png 768w\" sizes=\"(max-width: 810px) 100vw, 810px\" \/><\/p>\n<p>An example of artwork using 3D stainless steel (ripples) as a circular panel using the cut panel method.<\/p>\n<h2><span id=\"Finally\">Finally.<\/span><\/h2>\n<p>This is an explanation of typical installation methods for 3D stainless steel panels.<\/p>\n<p>Depending on the shape of the panel, the mounting position, and the environment, you may need to make some adjustments, but the feature of the panel is that it has a highly expandable and flexible structure.<\/p>\n<p>We hope you will consider the various ways of installing the panels.<\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>contents1 Different panel shapes of 3D design stainless steel2 What are the features and cautions of cut panels?2.1 Installation of 3D stainless steel design cut panels2.2 View of the screws that prevent the 3D stainless steel design cut panel from falling off.3 What are the features and cautions of bent &#8230; <\/p>\n","protected":false},"author":1,"featured_media":2000,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[5],"tags":[],"_links":{"self":[{"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/posts\/1984"}],"collection":[{"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/comments?post=1984"}],"version-history":[{"count":8,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/posts\/1984\/revisions"}],"predecessor-version":[{"id":2564,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/posts\/1984\/revisions\/2564"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/media\/2000"}],"wp:attachment":[{"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/media?parent=1984"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/categories?post=1984"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mako-metal.com\/eng\/wp-json\/wp\/v2\/tags?post=1984"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}