![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image1-300x200.png\")
<\/p>\nThe majestic art design of titanium has the power to transcend time.<\/p>\n
Its presence invites the wind of eternity into the space.<\/p>\n
<\/p>\n
\uff1dClick here to download the catalog.\uff1d<\/strong><\/span><\/span><\/a><\/p>\n <\/p>\n contents<\/p> Titanium is a very expensive metal.<\/p>\n The titanium used to decorate beautiful architecture is called pure titanium. Its corrosion resistance is overwhelmingly outstanding, and its performance is outstanding in outdoor environments. Titanium transcends time and is gentle to people. Although titanium is such a wonderful material, the price of the material is expensive in proportion to its performance. In fact, it is easy.<\/p>\n Even so, the processing cost is much higher than that of general-purpose stainless steel. But!<\/p>\n If you want to use it on walls, floors, or ceilings, there is a simple way to make and install the panels. We will explain it step by step.<\/p>\n This process reduces the “TOTAL COST” and gives you a high end majestic art design. Shearing and laser processing are recommended because they require precision. <\/p>\n Recommended by Nitto Denko Corporation Nitto SPV205<\/p>\n <\/p>\n <\/p>\n You can use your favorite adhesive, but if you are using it directly on the calcium carbonate plate, use elastic mastic. <\/p>\n You can use a sealer for calcium carbonate board, but we use a cationic sealer. <\/p>\n Apply the adhesive and spread it with a spatula. <\/p>\n The two of us paste the corners together. <\/p>\n If you have a lamination press, use it. <\/p>\n <\/p>\n Peel off the film and check for any undulation on the surface. In the case of a floating edge or square, try pouring adhesive from the side and fixing it in place. <\/p>\n The specific gravity of titanium is 4.51. For safety and prevention of falling off, it is recommended to use screws.<\/p>\n <\/p>\n How about it?<\/p>\n Many people think that it is very difficult to paste metal, but it is not.<\/p>\n It can be attached just like a hard wooden board.<\/p>\n Some people say that it is difficult to cut the material in the field, but 0.3mm titanium and 0.4mm titanium can be cut with metal scissors.<\/p>\n Just use a grinder to remove the cut edge.<\/p>\n <\/p>\n We hope that many stores and facilities will be able to use our high-end, top-quality materials with ingenious processing.<\/p>\n The adhesives introduced in this article can be purchased on the web.<\/p>\n If you need surface protection tape, please contact us.<\/p>\n Or, we can put it on the calcium carbonate board and deliver it in the specified size!<\/p>\n High-end materials at your fingertips!\u3000[High-end materials at your fingertips!<\/p>\n Wouldn’t you like to feel the wind of eternity?<\/p>\n <\/p>\n The installation video is available exclusively on Youtube. Please check it out.<\/p>\n ‘https:\/\/youtu.be\/smZXhelRDDE’What is Titanium?<\/span><\/h3>\n
\nThe titanium used to decorate beautiful architecture is made of pure titanium, an element with a purity of 99.9% or higher. It is pure titanium.<\/p>\n
\nOn the other hand, in the interior, it is extremely biocompatible and stable in the human body, such as in implants and artificial joints.
\nIts performance does not cause any damage to the hand that touches it.<\/p>\n
\nThe majestic brilliance is a material color unique to titanium.<\/p>\n
\nIn addition, pure titanium is originally a metal that is very easy to process.
\nHowever, it is often confused with other titanium alloys and thought to be “difficult to process! However, it is often confused with other titanium alloys and thought to be “difficult to process!<\/p>\n
\nThat’s why some people say, “It’s not easy to use.<\/p>\n
\nIf you are an interior decorator, this is an easy way to finish the job.<\/p>\n
\nThis process reduces the “TOTAL cost” and lowers the hurdle of providing high-end, majestic art design titanium to the space.<\/p>\nDescription of procedure<\/span><\/h3>\n
\u2460 Assign the wall surface and determine the dimensions in advance.<\/strong><\/span><\/h4>\n
\u2461 Cut the designing titanium according to its dimensions.<\/strong><\/span><\/h4>\n
\nOf course, 0.3mm and 0.4mm titanium can be cut with metal scissors.<\/p>\n![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image2-300x200.jpg\")
\u3000Cut golden titanium to desired dimensions.<\/p>\n\u2462 Apply surface protection tape to protect the Golden Titanium surface.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image3-300x200.jpg\")
\u3000The white film is the surface protection tape.<\/p>\n\u2463 Prepare the silica board.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image4-300x200.jpg\")
\u3000Cut it to the same size as Golden Titanium to be applied on the front.<\/p>\n\u2464 Prepare the adhesive.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image6-300x200.jpg\")
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image5-300x200.jpg\")
<\/p>\n
\nIf you want to sandwich stainless steel between titanium and calcium plate, Metal Grip (3M) is a good choice between titanium and stainless steel.
\nIf you want to sandwich stainless steel between titanium and calcium plate, Metal Grip (3M) is a good choice.<\/p>\n\u2465 Apply primer to the silica board.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image8-300x200.jpg\")
<\/p>\n
\nWe also recommend a primer called MP1000.
\nThe sealant has a drying time. Please make sure to let it dry.<\/p>\n\u2466 Apply the adhesive and blend it evenly.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image7-300x200.jpg\")
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image9-300x200.jpg\")
<\/p>\n
\nIf there is a lump of adhesive, it may cause distortion in the area, so spread the adhesive so that it has an average thickness.<\/p>\n\u2467 Lamination of silica plate and titanium<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image11-300x167.jpg\")
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image10-300x168.jpg\")
<\/p>\n
\nPay close attention to make sure there is no misalignment of the squares.<\/p>\n\u2468 Place weights on the adhesive to allow it to cure.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image12-300x200.jpg\")
<\/p>\n
\nIf you don’t have one, use a flat object to hold it down (for example, a thick steel plate or a flat block).
\nTry to apply an average load, but work on a flat floor or table.
\nIf the platform is uneven, it will deform.
\nThere is a curing time for the adhesive.\u3000Be sure not to use it until it hardens.<\/p>\n\u2469 After the adhesive has cured, remove the weights and fixing jigs.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image13-300x200.jpg\")
<\/p>\n\u246aconfirmation<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image15-300x200.jpg\")
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image14-300x200.jpg\")
<\/p>\n
\nMake sure there is no lifting of the edges.
\nMake sure there is no lifting of the square. If the surface is undulating, it is difficult to correct.<\/p>\n
\nThis may improve the situation.<\/p>\n\u246b Installation on walls, ceilings, floors, etc.<\/strong><\/span><\/h4>\n
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image17-300x200.jpg\")
![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image16-300x200.jpg\")
<\/p>\n
\nThe thickness of titanium is 0.3 mm or 0.4 mm, so it is very light.
\nPlease install it in the same way you install a calcium carbonate plate.<\/p>\n
\n![\"\"](\"https:\/\/www.mako-metal.com\/eng\/makomtlen\/wp-content\/uploads\/2020\/04\/image18-300x200.jpg\")
<\/p>\n
\n